Managing sound and lighting for indoor performances

An indoor eisteddfod brings together many forms of Welsh performance in a shared space: solo singing, choirs, recitation, folk dancing, instrumental music and cerdd dant. Each has different technical needs, yet the audience should experience the programme as one coherent event. Clear sound, suitable lighting and calm backstage coordination make that possible.

Good production values do not require a large theatre budget. They depend on careful preparation, realistic equipment choices and a team that understands how the room will be used. A village hall, school stage or community centre can support a memorable performance when the organisers plan around the venue rather than trying to force a standard setup into every building.

Sound and lighting should serve the performers, preserve the character of live music and help the audience remain engaged. The technical arrangement must be safe, discreet and flexible enough to accommodate quick changes between acts. Early decisions also reduce stress for volunteers on the day.

Start with the room and the programme

Before hiring equipment, inspect the venue at the same time of day as the planned performance. Note the stage dimensions, ceiling height, audience layout, power sockets, curtains, windows, heating systems and hard surfaces that may create echoes. A room with wooden floors and bare walls will behave very differently from one with carpets, acoustic panels and upholstered seating.

Walk through the complete programme and identify its changing demands. A solo reciter may need one stable microphone, while a choir may require several microphones placed across the front of the stage. Folk dancing needs open floor space and an even wash of light, whereas a cerdd dant performance may benefit from a quieter stage environment and careful balance between voices and instruments.

Ask the venue whether any equipment is already installed and who is permitted to operate it. Some buildings have fixed lighting bars or a sound system that can be used only by an approved technician. Confirm the location of the mixing position, the available power supply and any restrictions on taping cables, suspending fixtures or moving furniture.

A simple stage plan should show performer positions, microphone stands, monitor speakers, music stands, lighting fixtures, cable routes and entrances. Share this plan with the stage manager and section leaders before the event. It gives everyone a common reference and reveals problems while they are still easy to solve.

Build a clear and reliable sound system

The sound system should make every performer intelligible without making the equipment itself the focus. For spoken items, a good-quality vocal microphone positioned at the right height is usually more valuable than a complicated collection of effects. The microphone should be close enough to capture a natural voice, but not so close that breathing and plosive sounds become distracting.

Choirs and larger vocal groups generally need microphones spaced evenly across the ensemble, angled towards the singers and raised above head height where practical. Too many microphones can create feedback and muddy the blend. A small number of well-placed microphones, supported by a sound check, often produces a more natural result than one microphone for every person.

Instrumental accompaniment requires separate consideration. A piano, harp, guitar, fiddle or electronic keyboard may need a direct connection or a dedicated microphone. Instruments should be balanced against voices rather than simply turned up until they are loud. The accompanist must be able to hear the performers, particularly when the stage is deep or the audience is large.

A mixing desk allows the operator to adjust volume, tone and microphone groups during the programme. Label every channel clearly, keep a written input list and mark the normal positions of important controls with removable tape. The operator should avoid constant changes and should use the rehearsal to establish dependable levels before the first audience member enters.

Wireless microphones can help with movement, presentations and stage announcements, but they introduce battery, frequency and interference risks. Keep spare batteries available, switch off unused transmitters and test every wireless unit in the actual venue. For children’s performances, secure body-pack transmitters safely and ensure that cables cannot catch on costumes or props.

Use lighting to support people and place

Stage lighting should allow the audience to see faces, gestures, costumes and movement without producing glare. A balanced front wash is the foundation. It should cover the full performance area with consistent brightness, avoiding strong pools of light that leave some performers in darkness.

Additional side or back lighting can help separate performers from the background and give folk dancing greater visual definition. Coloured light may add atmosphere to a musical item, but saturated colours can make skin tones and costumes appear unnatural. Subtle changes are usually more effective than rapid sequences of colour and movement.

The lighting operator should know the running order and any planned transitions. Prepare simple cues for the opening, individual sections, interval, adjudication and closing presentation. A cue sheet can include the item title, lighting state, sound requirement, performer entrance and approximate duration. This prevents the operator from relying on memory during a busy programme.

Lighting equipment must be placed with safety in mind. Check that fixtures are securely mounted, stands are weighted or protected from impact, and hot lamps are kept away from curtains, paper decorations and low ceilings. LED fixtures are often useful for community events because they produce less heat and consume less power, although their colour quality and control system should still be checked in advance.

Audience comfort matters as much as stage appearance. Do not aim fixtures directly into spectators’ eyes, and consider how exit signs, house lights and windows will affect the visual atmosphere. Keep enough light on aisles and access routes for safe movement, especially during an interval or when younger performers are entering and leaving.

Match equipment to performance needs

The following guide can help an organising committee decide where to focus its technical effort. It is a starting point rather than a substitute for a venue test, because room acoustics and audience size will always influence the final arrangement.

Performance need Sound approach Lighting approach Main check
Solo singing One vocal microphone with a stable stand and gentle monitoring Even front wash with clear face light Avoid feedback when the singer moves
Choir Two or more carefully spaced microphones, depending on group size Broad, shadow-free coverage across the ensemble Confirm that outer singers are visible and audible
Recitation Dedicated speech microphone with minimal effects Bright, neutral light on the speaker Test consonant clarity from the back row
Folk dancing Playback or live accompaniment balanced below footwork and calls Wide stage wash with side light for movement Keep the full dance area free from dark patches
Cerdd dant Separate vocal and instrumental inputs with a controlled balance Calm, warm general state with limited changes Preserve detail without over-amplifying the accompaniment
Presentations and announcements Spare handheld or lectern microphone House or stage lighting that supports movement Keep the microphone ready between items

The table also highlights why a single preset rarely serves a whole eisteddfod. A bright, close microphone setting that works for a reciter may make a choir harsh or cause feedback. Likewise, dramatic lighting designed for a dance can distract from a quiet vocal performance.

Plan transitions as part of the programme rather than treating them as gaps between items. Place spare microphones in marked positions, keep stands at consistent heights and assign one person to move equipment. If chairs, music stands or risers must be repositioned, rehearse the movement and keep it away from the main performance whenever possible.

Rehearse with the whole technical team

A technical rehearsal should include the performers, accompanists, stage crew, sound operator and lighting operator. It is not enough to switch on the system and test one microphone. Run representative sections from the programme, including the loudest song, the quietest spoken item, the largest group and the most complicated stage change.

Ask someone to listen from several audience positions, especially the back and sides of the room. Sound that seems balanced beside the mixing desk may be too quiet or too bass-heavy elsewhere. A listener should report whether words are clear, whether accompaniment covers voices and whether any part of the stage feels visually dim.

Make a written running order with cue points and technical notes. Use plain descriptions such as “choir microphones live”, “front wash”, “house lights half” and “handheld ready”. If Welsh and English announcements are included, label them clearly so the operator can follow the same sequence as the presenter.

Allow performers to become familiar with the stage, microphone positions and lighting level. Young singers and dancers may need reassurance if the room looks different under performance lights. Explain where they should wait, how they should enter and who will signal the start. This small amount of preparation can prevent hesitation and reduce noise backstage.

Keep a contingency plan for equipment failure. A spare wired microphone is often more useful than an additional special effect. Have extension leads, adaptors, fresh batteries, cable ties, gaffer tape and a torch in a labelled technical box. Do not improvise electrical repairs during the event; isolate faulty equipment and use the backup arrangement.

Coordinate volunteers and protect the atmosphere

Clear roles are essential when the technical team is made up of volunteers. One person should have overall responsibility for sound, another for lighting and another for stage movement, even if they occasionally assist each other. A stage manager can communicate with performers and presenters while the operators concentrate on their controls.

Use a short briefing before doors open. Confirm the emergency exits, first-aid arrangements, fire safety rules, power isolation point and procedure for stopping the programme. Everyone handling cables or fixtures should understand which areas must remain clear. Children should not be allowed to operate equipment or move heavy stands without suitable supervision.

The technical desk should be positioned where the operator can see the stage, hear the room and communicate with the stage manager. Avoid placing it in a corridor or behind a wall. Keep drinks away from electrical equipment, secure loose paperwork and make sure audience members cannot accidentally unplug essential connections.

A respectful production style supports the cultural character of the event. Transitions should be efficient without becoming rushed, and amplification should preserve the natural qualities of Welsh singing, speech and instrumental playing. When a performance draws on Welsh cultural heritage, technical choices should enhance its connection with the audience rather than overshadowing the tradition being presented.

Make access and safety part of production

Accessibility begins with clear communication. Provide performers with information about microphone heights, stage edges, lighting changes and waiting areas in advance. A performer with hearing loss may need a different monitoring arrangement, while someone with visual sensitivity may benefit from warning about bright or rapidly changing lights.

Keep aisles, ramps and emergency exits unobstructed. Tape cables across walking routes with proper cable covers or route them away from public areas. Check that stage steps are stable and visible, and do not allow black drapes or equipment cases to create hidden trip hazards at the edge of the performance area.

Sound levels should remain comfortable for performers, volunteers and the audience. Excessive volume can damage hearing and make speech less intelligible. Encourage operators to make measured adjustments rather than treating loudness as a sign of quality. Children and older audience members may be particularly affected by harsh or sudden sound.

After the performance, power down equipment in a controlled order, beginning with amplifiers and powered speakers where appropriate. Coil cables without tight kinks, remove tape carefully and record any faults while they are still fresh in everyone’s mind. A short debrief can identify what should be retained for the next local eisteddfod.

Practical priorities for the organising team

When sound and lighting are planned with care, performers can concentrate on interpretation, expression and shared enjoyment. The audience hears the words, music and harmony clearly, sees the movement and character of each item, and experiences smooth transitions between generations and traditions.

For local committees, the strongest approach is to begin with the venue, listen critically during rehearsal and keep every decision connected to the performers’ needs. Use this process for the next indoor event, record what worked, and build a dependable technical routine that volunteers can pass on to future organisers.